An armbinder is one of the most recognisable pieces of leather bondage gear. It holds both arms together behind the back in a single sleeve, creating a striking posture and a strong feeling of restraint. This guide explains the main types, how to get the right fit, and the safety rules every couple should know before using one.
What is an armbinder?
An armbinder is a tapered leather sleeve, sometimes called a single glove, that encloses both forearms behind the back. It is tightened with laces, straps or a zip, and is usually held in place by shoulder straps that stop it sliding down. Compared with wrist cuffs, it spreads pressure along the whole forearm, which many people find more comfortable for longer scenes.
Types of armbinder
- Laced armbinders: the classic style. Lacing lets you adjust the tightness evenly along the arm.
- Strapped armbinders: buckled straps replace or add to the lacing, so it goes on and comes off faster.
- Zip armbinders: the quickest to fit and remove, ideal for beginners.
- Integrated designs: some sleepsacks and straitjackets include a built-in armbinder for full-body restraint.
How to choose the right size
A good fit is the most important factor for comfort and safety. Measure:
- Arm length: from the tip of the middle finger to just above the elbow, with the arm straight.
- Upper circumference: around both arms held together, just above the elbows.
- Lower circumference: around both wrists held together.
If you are between sizes, choose the larger one and tighten it with the laces. Many of our leather restraints can be made to measure: contact us with your measurements before ordering.
Flexibility matters
Bringing the elbows close together behind the back takes shoulder flexibility. Most people cannot, and should not, force their elbows to touch. Start loose, with the elbows a comfortable distance apart, and only tighten as far as feels good. Gentle shoulder stretches before a scene help.
Armbinder safety checklist
- Agree a safe word and a non-verbal signal, because the wearer cannot use their hands.
- Never leave the wearer alone, and never combine an armbinder with anything around the neck.
- Check circulation often: cold, pale or blue fingers, tingling or numbness mean loosen it immediately.
- Keep safety shears nearby so the armbinder can be removed quickly in an emergency.
- Start with short sessions of 10 to 15 minutes and build up slowly.
- Help with balance: the wearer cannot break a fall, so keep them seated or supported on uneven ground or stairs.
Pairing an armbinder with other gear
An armbinder is often combined with a leather collar, a hood or bondage mittens. If you add a hood or gag, take extra care that breathing and communication stay easy. Browse the full leather bondage gear range for more ideas.
How to care for a leather armbinder
Wipe the inside and outside with a damp cloth after each use and let it air dry away from direct heat. Condition the leather every few months to keep it supple, and store it flat or loosely rolled. See our leather care guide for step-by-step tips.
Frequently asked questions
Are armbinders comfortable?
A well-fitted armbinder spreads pressure along the forearms and can be worn comfortably for longer than many restraints. Comfort depends on fit and shoulder flexibility.
Is an armbinder suitable for beginners?
Yes, if you start loose and keep sessions short. A zip or strapped style is the easiest to begin with.
Can I get a custom-sized armbinder?
Yes. Send us your measurements and we can make one to fit.